DEVIsnow 300T (DTCE) 75x1100cm 8.25m² 2630W – 83902059
€ 500,55 exkl. USt.
DEVIsnow 300T (DTCE) 75x1100cm 8.25m² 2630W – 83902059 is backordered and will ship as soon as it is back in stock.
Ready-to-install heating mat with a connection cable suitable for installation in reinforced concrete, screed or sand bed. With additional protective braiding for use with an RCD. This heating mat system is particularly suitable for installation in winding and/or large areas, as there is no need to return the second connection. Incl. factory-fitted watertight sleeves and a 10 m long cold lead, lay in accordance with the installation instructions. Measurement of insulation and total resistances. Heating cable according to IEC 60800, voltage: 400 V, rated limit temperature: 80°C, specific heating power: 300 W/m², resistance tolerance: +10% / -5%, minimum installation temperature: 5°C, minimum bending radius: 5 x dA, protection class: IP X7, area 8.3 m², 2630 W,
€ 500,55 exkl. USt.
DEVIsnow 300T (DTCE) 75x1100cm 8.25m² 2630W – 83902059 is backordered and will ship as soon as it is back in stock.
Technische Parameter
Technische Parameter
| Heating conductor load | 30 W/m | Length of cold leads | 10000 mm |
| Fixing of heating conductor | glued | Resistance | 60.8 Ohm |
| Width | 750 mm | Thickness | 7 mm |
| Design | Heating cable | Number of cold leads | 1 |
| Length | 11000 mm | Power | 300 W/m² |
| With controller | No | Connection voltage | 400..400 V |
| Suitable for damp rooms | Yes | Suitable for roof heating | No |
| Area | 8.25 m² | Self-adhesive | No |
| Suitable for outdoor heating | Yes | Connected load | 2630..2630 W |
| With carrier mat | Yes | With room thermostat | No |
| With floor temperature sensor | No |