DEVIsnow 300T (DTCE) 1760W 0.5x11.8m 5.9m² – 83902026
€ 435,94 exkl. USt.
DEVIsnow 300T (DTCE) 1760W 0.5x11.8m 5.9m² – 83902026 is backordered and will ship as soon as it is back in stock.
Ready-to-install heating mat with a connecting cable suitable for installation in reinforced concrete, screed or sand bed. With additional protective braiding for use with an RCD. This heating mat system is particularly suitable for installation in angled and/or large areas, as there is no need to route the second connection back. Incl. factory-fitted waterproof sleeves and a 10 m cold lead, to be laid system-conformingly according to the installation instructions. Measurement of insulation and total resistances. Heating cable according to IEC 60800, voltage: 400 V, rated limit temperature: 80°C, specific heating power: 300 W/m², resistance tolerance: +10% / -5%, minimum laying temperature: 5°C, minimum bending radius: 5 x dA, protection class: IP X7, area 5.9 m², 1760 W,
€ 435,94 exkl. USt.
DEVIsnow 300T (DTCE) 1760W 0.5x11.8m 5.9m² – 83902026 is backordered and will ship as soon as it is back in stock.
Technische Parameter
Technische Parameter
| Design | Heating cable | With carrier mat | Yes |
| Fixing of the heating conductor | glued | Self-adhesive | No |
| Connection voltage | 400..400 V | Connected load | 1760..1760 W |
| Power | 300 W/m² | Heating conductor load | 30 W/m |
| Resistance | 90.1 Ohm | Number of cold leads | 1 |
| Length of cold leads | 10000 mm | Suitable for damp rooms | Yes |
| Suitable for open-air heating | Yes | Suitable for roof heating | No |
| Area | 5.9 m² | Length | 11800 mm |
| Width | 500 mm | Thickness | 7 mm |
| With controller | No | With room thermostat | No |
| With floor temperature sensor | No |