DEVIsnow 300T (DTCE) 1050W 0.5x7m 3.5m² – 83902023
€ 367,78 exkl. USt.
DEVIsnow 300T (DTCE) 1050W 0.5x7m 3.5m² – 83902023 is backordered and will ship as soon as it is back in stock.
Ready-to-install heating mat with a connection cable, suitable for installation in reinforced concrete, screed, or a sand bed. With additional protective braiding for use with an RCD (residual current device). This heating mat system is particularly suitable for installation in convoluted and/or large areas, as there is no need to route back the second connection. Includes factory-fitted waterproof sleeves and a 10 m long cold lead, to be laid system-appropriately according to the installation instructions. Measurement of insulation and total resistances. Heating cable according to IEC 60800, Voltage: 400 V, Rated limit temperature: 80°C, Specific heating power: 300 W/m², Resistance tolerance: +10% / -5%, Minimum installation temperature: 5°C, Smallest bending radius: 5 x dA, Protection class: IP X7, Area 3.5 m², 1050 W,
€ 367,78 exkl. USt.
DEVIsnow 300T (DTCE) 1050W 0.5x7m 3.5m² – 83902023 is backordered and will ship as soon as it is back in stock.
Technische Parameter
Technische Parameter
| Design | Heating cable | With carrier mat | Yes |
| Heating conductor fixing | glued | Self-adhesive | No |
| Connection voltage | 400..400 V | Connected load | 1050..1050 W |
| Power | 300 W/m² | Heating conductor load | 30 W/m |
| Resistance | 148 Ohm | Number of cold conductors | 1 |
| Length of cold conductors | 10000 mm | Suitable for damp rooms | Yes |
| Suitable as open-area heating | Yes | Suitable as roof heating | No |
| Area | 3.5 m² | Length | 7000 mm |
| Width | 500 mm | Thickness | 7 mm |
| With controller | No | With room thermostat | No |
| With floor temperature sensor | No |