BUSCH-JAEGER Display 2.4" for Busch-balance® SI – 2TMA310010B0001

For Busch-balance® SI.
Freely programmable touch panel with a 2.4-inch IPS screen with a resolution of 240*240, enabling control and monitoring of the free@home or KNX system.
Control, monitor and manage your entire installation on one device:
Switching - Dimming - Slider - Blind - RGBW control - Step switch - Scene switch - Display element - Audio control.
The display includes a brightness and proximity sensor.
Operation is supported by haptic feedback.
The display includes an integrated temperature controller (RTC) with an integrated temperature sensor.
A remote sensor (e.g. 6226/T / PT1000) can optionally be connected to the rear input for temperature detection.
An additional 24VDC power supply (e.g. 6358-101) is required for operation.

KNX:
Up to 12 control pages with up to 12 control elements can be created.
A maximum of 1-4 touch surfaces are possible per page.
10 scene actuators,
10 logic functions,
10 presence simulations and time programs,
18 fault and alarm messages.
The primary function allows direct operation of a function when touching the display.
The rear input can also be used as a binary input instead of a remote sensor.

free@home:
Up to 16 control functions can be created on up to 4 pages.
A maximum of 4 touch surfaces are possible per page.
The scene function, logic functions, presence simulation, and time programs are already provided in free@home by the System Access Point and are therefore not required additionally in the display.
Fault and alarm messages are displayed as "pop-ups".
The rear input can be used to connect a remote sensor (e.g. 6226/T / PT1000).
Design line: Busch-balance® SI, Busch-Trevion®
Product range: KNX, Busch-free@home®