ELTAKO Digital adjustable 2-channel timer with astro function – 23200901

2-channel time switch. 1+1 normally open contact, potential-free, 16A/250V AC. 230V LED lamps up to 600W, incandescent lamps 2000W. With astro function. Stand-by loss only 0.03-0.4 watts. With display lighting. Modular device for mounting on DIN-EN 60715 TH35 mounting rail. 1 module unit = 18mm wide, 58mm deep. With the patented ELTAKO duplex technology (DX), the normally potential-free contacts can still switch at zero crossing when switching 230 V AC voltage 50Hz, thus drastically reducing wear. To do this, simply connect the N conductor to terminal (N) and L to 1 (L) and/or 3(L). This results in an additional stand-by loss of only 0.1 watts. Due to the use of bistable relays, there is no coil power loss and no associated heating even when switched on. Up to 60 time switch memory locations are freely distributed among the channels. With date and automatic daylight saving/standard time changeover. Power reserve without battery approx. 7 days. Each memory location can be assigned either the astro function (automatic switching according to sunrise or sunset), the ON and OFF time or a pulse switching time (where a 2-second pulse is triggered). The ON or OFF astro time can be shifted by ± 2 hours. In addition, a time shift of up to ± 2 hours influenced by the solstices can be entered. With control input (+A1) for central ON or OFF control with priority. Supply and control voltage for central control 12..230V UC. The time switch is set using the MODE and SET buttons, and a key lock is possible. Pressing MODE or SET switches on the display lighting. 20 seconds after the last MODE or SET operation, the program automatically returns to the normal display and the display lighting switches off. Set language: After each power supply is applied, the language can be selected with SET within 10 seconds and confirmed with MODE. D = German, GB = English, F = French, IT = Italian and ES = Spanish. The normal display then appears: weekday, time, day and month. Fast scroll: In the following settings, the numbers scroll up quickly if the input button is pressed longer. Releasing and pressing again for longer changes the direction. Set time: Press MODE and then, under PRG (Program), use SET to find the UHR function and select it with MODE. For S, select the hour with SET and confirm with MODE. Proceed in the same way for M as minute. Set date: Press MODE and then, under PRG, use SET to find the DAT function and select it with MODE. For J, select the year with SET and confirm with MODE. Proceed in the same way for M as month and T as day. As the last setting in the sequence, MO (weekday) flashes. This can be set with SET and confirmed with MODE. Set location (if astro function is desired): A list of German cities can be found at the end of the operating instructions. Press MODE and then, under PRG, use SET to find the POS function and select it with MODE. For BRT, select the latitude with SET and confirm with MODE. Proceed in the same way for LAE, select the longitude and confirm with MODE. Now, for GMT, select the time zone with SET and confirm with MODE. If desired, a time shift of up to ± 2 hours can now be entered for WSW (winter solstice) and SSW (summer solstice), for both channels together. Manual switching ON or OFF with priority: Press MODE and then, under PRG, use SET to find the INT function and select it with MODE. For KNL, select channel 1 or 2 with SET and confirm with MODE. Now you can switch between AUT (automatic), EIN (ON) or AUS (OFF) with SET. After confirmation with MODE, the switch position of the selected channel may change. If the switching state is to switch automatically again when a time program becomes active, AUT (automatic) must then be selected again. If MODE is pressed for longer than 2 seconds during one of the confirmations, the change is saved and the normal display appears. Daylight saving/standard time changeover: Press MODE and then, under PRG, use SET to find the SWZ function and select it with MODE. Now you can switch between EIN (ON) and AUS (OFF) with SET and confirm with MODE. If EIN was selected, the changeover takes place automatically. Central control ON or OFF with priority in automatic mode (AUT): Press MODE and then, under PRG (Program), use SET to find the ZEA function and select it with MODE. Now you can switch between ZE and ZA with SET and confirm with MODE. Switch random mode on/off: Press MODE and then, under PRG, use SET to find the ZUF function and select it with MODE. Set to EIN (ZUF+) or AUS (ZUF) with SET and confirm with MODE. When random mode is switched on, all switching times of all channels are randomly shifted by up to 15 minutes. Switch-on times to earlier and switch-off times to later. Enter time switch programs: according to operating instructions. Switch on key lock: Press MODE and SET briefly together and lock with SET at LCK. This is indicated by an arrow next to the lock symbol. Switch off key lock: Press MODE and SET together for 2 seconds and unlock with SET at UNL.