BUSCH-JAEGER Dimming actuator 4-gang, DIN rail mounted 6252/0.4-102 – 2CKA006220A0728

Multi-channel universal dimming actuator optimized for dimming retrofit LED lamps (LEDi). Also suitable for dimming incandescent lamps, low-voltage halogen lamps with conventional or electronic transformers, 230 V halogen lamps, and dimmable halogen energy-saving lamps. Automatic load detection (can be deactivated). Separate N-terminal per channel. Outputs can be connected in parallel to increase output power. Outputs can be connected in parallel as desired. Minimum load: 2W. Manual operation on the device is possible even without bus voltage or in an unprogrammed state. Device programming is possible even without an applied 230V supply voltage. With integrated bus coupler. Rated power at 230 V~ mains voltage: 230 V~ incandescent and halogen lamps: 4 x 210 W/VA up to 1 x 600 W/VA. Dimmable 230 V~ LEDi: 4 x 210 W/VA up to 1 x 600 W/VA in trailing edge mode, 4 x 80 W/VA up to 1 x 200 W/VA in leading edge mode. Inductive L-transformers with LED/low-voltage halogen lamps: 4 x 210 W/VA up to 1 x 600 W/VA. Electronic C-transformers with LED/low-voltage halogen lamps: 4 x 210 W/VA up to 1 x 600 W/VA. Electronic LC-transformers with LED/low-voltage halogen lamps: 4 x 80 W/VA up to 1 x 200 W/VA. Programming only possible with applied bus voltage via the system access point's web interface. Further information on commissioning and operation can be found in the system manual and the online operating instructions in the current online catalog. Recommendation: Always use lamps of the same type and manufacturer.